Identify Your Substrate
Correct identification of your substrate is critical, as it determines the products required for your Render Systems Australia (RSA) project.
Choose from the popular substrates below to review the relevant Specification Sheets, Technical Data Sheets and Application Guidelines for your reference when choosing the most suitable RSA Complete Render System for your project.
Please note there are several other substrates listed in the specification sheet section. If your substrate/surface type differs to this list please contact us for system confirmation
| Substrate | Description | Application Guidelines PDF |
 |
Masonry (prepared clay brick or concrete block) | Substrate Preparation & Product Application Information |
 |
Concrete & Low Porosity Substrates | Substrate Preparation & Product Application Information |
 |
M Grade Expanded Polystyrene Systems (EPS) | Substrate Preparation & Product Application Information |
 |
Blueboard Sheeting (Fibre Cement) | Substrate Preparation & Product Application Information |
 |
AAC Lightweight Panels (Hebel®) | Substrate Preparation & Product Application Information |
 |
AAC Lightweight Blocks (Hebel®) | Substrate Preparation & Product Application Information |
 |
NRG M Grade Greenboard | Substrate Preparation & Product Application Information |
IMPORTANT COLOUR INFORMATION
When choosing a protective coating for application over any EPS substrate, the colour section must achieve a Light Reflectance Value (LRV) of greater than or equal to 40%.
RSA is not liable for product or substrate failure where the LRV of the tinted texture protective coating is under 40%.
