Application Guidelines

Always read the Technical Data Sheets and Application Guidelines for Render Systems Australia products prior to use. Application Guidelines include substrate preparation and product application information for your reference.

Surface / Substrate Render System Application Guidelines PDF
AAC Lightweight Panel RSA Coating Systems icon-pdf
Various Surfaces & Substrates Bling Coarse System icon-pdf
Previously Painted Surfaces RSA Coating Systems icon-pdf
AAC Lightweight Blocks RSA Coating Systems icon-pdf
Concrete and Low Porosity Substrates RSA Coating Systems icon-pdf
Blue Board Sheeting (Fibre Cement) RSA Coating Systems icon-pdf
Insitu Concrete Formwork RSA Coating Systems icon-pdf
M Grade Expanded Polystyrene System (EPS) RSA Coating Systems icon-pdf
Masonry Substrates RSA Coating Systems icon-pdf
NRG M Grade Greenboard RSA Coating Systems icon-pdf
Various Surfaces & Substrates RSA Cleanskin (Protective Coating) icon-pdf
Various Surfaces & Substrates RSA Rapid Shield Matt (Protective Coating) icon-pdf
Various Surfaces & Substrates Set & Prep Multi-Purpose Adhesive icon-pdf
Various Surfaces & Substrates General Cleaning and Maintenance icon-pdf

IMPORTANT COLOUR INFORMATION

When choosing a protective coating for application over any EPS substrate, the colour section must achieve a Light Reflectance Value (LRV) of greater than or equal to 40%.
RSA is not liable for product or substrate failure where the LRV of the tinted texture protective coating is under 40%.